No matter what kind of vehicle you use, whether it is a mid-to-high-end car or an old-style semi-trailer, if you want the bulk cement transport truck to have a long service life and be safe, you must perform regular maintenance on the bulk cement transport truck. bring hidden dangers.
The vehicle is quiet and normal use should pay attention to “three points of repair and seven points of maintenance”. Obviously, this is to let consumers establish the awareness that Chinese trailers can adjust tension as usual.
It is common for Chinese bulk cement transport trucks to check the tire pressure frequently. It is necessary to keep the tire pressure link within the scale value. If the tire pressure is too low, it will increase the fuel consumption of the vehicle. Meeting the required tire pressure can reduce fuel consumption by 3.3 percentage points. It is necessary to replace the engine oil regularly, pay attention to cleaning carbon deposits and cleaning devices, and replace spark plugs in time. Refuel at a regular gas station, and choose fuel according to the standard value according to the compression ratio of the bulk cement transport truck in China. High or low city numbers will result in longer and shorter life spans for cylinders and nozzles.
Even if you don’t want to increase the electricity consumption of the car, you can deploy the device to avoid increasing the load on the generator. During running-in, it is necessary to stop the load, overspeed and underspeed. Fuel-efficient driving can not only reduce fuel consumption, but also prolong the service life of the vehicle. Therefore, it is often necessary to learn to drive accurately in black and white. Be sure to understand the road conditions and park your car before setting off. Minimize the load on the Chinese trailer. Don’t rush to hit the gas pedal, brake and accelerate. On the highway, even if you are driving at an economical speed, you should avoid driving at low speeds and high speeds. When you see a red light, stop fuel early, take measures to stop taxiing without turning off the engine, and step on the brakes. Even in high gear, manual transmission vehicles should shift gears in real time after the vehicle speed stabilizes. Stop the idling of Eternal Kalpa.
The transmission of the car is very important. Of course, the Chinese trailer we used is no exception. Only by doing good maintenance and maintenance can the service life of the trailer transmission be extended. The following is an introduction to the precautions of China’s bulk cement transport truck gearbox.
When the Chinese bulk cement transport truck is moving forward, do not shift into the reverse gear; similarly, when the Chinese trailer slides backwards, do not shift into the forward gear, and must wait for the Chinese trailer to stop completely before changing gears. Second, for the driving gear, whether you change to high gear or low gear, you should try to shift gears at an appropriate speed to avoid sudden deceleration or shaking between shifts. At the same time, remember that the clutch must be pressed to the bottom when changing gears.
Related Reading
- Care and Maintenance of Bulk Trailer Manufacturers
- What is the China Bulk Cement Truck Wholesale Price
- 9 Step Cement Bulker Safety Manual Guide
- New Cement Bulker Transporters Vs Used Cement Bulker Transporters
When parking on a slope due to red lights and other reasons, brakes should be used to stop the trailer. Never use the power of the engine to tow the trailer to prevent backsliding. For example, some drivers like to use the way of half stepping on the clutch and half stepping on the accelerator to prevent the car from backing up, but this will cause wear and tear on the engine and transmission. Good handling practices play a large role in the service life of the vehicle, so the maintenance of the trailer during the break-in period is very important.
