The long-term use of the cement bulk trailer will cause some parts to be worn out, and regular maintenance and maintenance are required. Panda chinese top semi trailer manufacturers, will introduce how to maintain the cement bulk trailer.
First, tire inspection
The tire pressure should be checked at room temperature every month. If it is lower than the normal standard, the tire pressure should be replenished in time. The air pressure cannot be too high or too low, otherwise it will affect the safety of driving. Check the cracks of the tires, and replace the tires in time if there is a safety hazard. When choosing tires, the models should be consistent.
Second, battery maintenance and inspection
Check whether the battery is firmly fixed, the electrolyte should be between the upper limit and the lower limit, and the electrolyte or distilled water should be added to the high line in time when it is close to the offline. Keep the positive and negative cables of the battery in good contact, and keep the battery clean and dry. For vehicles that have been placed for a long time, remove the positive and negative cables of the battery, reconnect the wires after about half a month and start the engine for about 20 minutes, and charge it in time if the power is obviously insufficient.
Third, check the liquid level of the clutch master pump
If the clutch liquid level is between the high and low liquid levels, it is normal. If it is lower than the standard line, the master cylinder or the slave cylinder cup may be damaged. When the engine is running, it will be difficult or impossible to shift gears, please go to the nearest service station for repairs immediately.
Fourth, check the cement bulk trailer brake fluid level
If the cement bulk trailer brake is also between high and low, it means normal. If the brake fluid is close to the lower limit or lower than the lower limit, it means that there may be leakage in the system or excessive wear of the brake shoes, and it should be repaired at the service station in time. When adding brake fluid, pay attention to adding the same type of brake fluid to prevent damage to the cup, and pay attention to protecting the paint to prevent corrosion of the paint surface.
Fifth, check the engine coolant level
Never open the radiator cap when the engine is hot, otherwise you may be scalded by splashed coolant or high-temperature steam. After the engine cools down, check that the liquid level of the coolant should be between the full level and the low level, otherwise distilled water or pure water or refrigerant should be added, and the liquid level after adding water should not exceed the full level. If it is found that the coolant decreases rapidly in a short period of time, check the cooling system for leaks or go to the maintenance station for inspection.
Related Reading：
- Cement Bulk Truck Engine Knowledge
- Screw Air Compressor Vs Swing Rod Air Compressor Vs Piston Air Compressor
- 9 Step Cement Bulker Safety Manual Guide
- 2023 Cement Bulker Recommended! No More Barriers to Choice
Panda China’s top Bulk Trailer Manufacturers specializes in the production of bulk cement trucks, powder material trucks, rear dump trucks, terminal container flatbed trucks, skeleton semi-trailers, flatbed trucks and other products.
If you want to know more about panda bulk cement truck, you can consult us and get the latest bulk cement truck price for free.
