How to Clean the Wheels of a Bulk Cement Trailer?
Nowadays, many bulk cement trailers generally use aluminium wheels, which are easy to get dirty in the process of driving, so special care should be taken when cleaning the wheels, as there is protective paint on the surface and neutral cleaning agents should usually be used.
For general dust and dirt, ordinary cleaning agents can be used, while long-standing dirt on the wheel, such as asphalt, black powder left by the brake friction pad wear, etc., is generally difficult to remove using ordinary cleaning agents, and can be cleaned with a powerful wheel cleaner;
After wheel cleaning, then use special protective agent for care, generally open bulk cement trailers driver master to maintain every two weeks should be thoroughly cleaned on the wheel hub dirt good habits.
Bulk Cement Truck How to Clean the Exterior of the Engine?
Remove the bulk cement trailers engine exterior ash stove and oil stains, the engine exterior can be dusted first with a brush or compressed air, etc., and then choose to scrub the exterior of the engine with a suitable engine cleaning agent for treatment, note that gasoline cannot be used to clean the engine exterior instead of special cleaning agents.
The engine is treated with surface rust stains and cleaned when small spots are generated, and removed when small spots are generated so that they are not more difficult to deal with when they are enlarged.
A rust remover can be sprayed on the rust spots and then scrubbed to clean the electrical circuitry part of the engine.
Parts of the electrical engine circuitry should be cleaned with specific care products. If treated with water and ordinary cleaning agents for a long time, it will only accelerate the deterioration of its plastic housing and the rubber of the wiring harness. It affects the starting and driving of the vehicle.
Note on Cleaning the Exterior of the Engine of a Bulk Cement Truck
When cleaning the exterior of the engine of a bulk cement trailers , you should use a cleaner with little alkalinity, which does not corrode the rubber and plastic parts and is coated with silver powder. Before scrubbing with the cleaning agent, use a brush or compressed air to remove dust or fine sand, etc.
When cleaning the engine room, take care not to spray the cleaning agent onto the electrical system parts, and not to use water to rinse. Otherwise it may cause an electrical short circuit and make the engine unable to start. If you accidentally splash on the electrical system, you should dry it with a dry cloth or blow it dry with compressed air.
Be sure to spray the cleaner onto a cotton cloth or sponge before scrubbing. After cleaning, you can wipe on the plastic and rubber parts to protect them from colour reproduction and cache ageing.
